260m Lift Cast Steel Multi-Stage Horizontal Oil Pump Self-Balancing Centrifugal Pump Used in Petrochemical Plants

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: 12-24 Months
• Model NO.: DY280-65(P)x4
• Max.Head: >150m
• Max.Capacity: 50-100 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Circulating Pump
• Flow Rate: 3.75 ~ 1360 M3 / H
• Lift: 92 ~ 1433 M
• Motor Power: 7.5 to 4000kw
• Degree: -20~105 Degrees
• Material: Cast Iron/Carbon Steel/Stainless Steel/Ggg40
• Transport Package: Plywooden Case
• Trademark: jiahua
• Origin: China
• HS Code: 8413709990
• Production Capacity: 100

Product Description

Product Description

DY series self-balancing horizontal multistage centrifugal pump, divided into single suction multistage structure and double suction multistage structure. Can transport does not contain particles (abrasive), does not contain suspended water or chemical properties similar to water for other liquids. It is also possible to change the material of the pump (or the material of the pump flow parts), seal the form and increase the cooling system for conveying hot water, oil, corrosive and abrasive media, etc.

Pump inlet pressure is not more than 0.6mpa.
 

Model significance:

Such as DY450-60 x9 (P)

DY------ Represents horizontal multistage centrifugal oil pump

450------- indicates that the design point flow is 450m3/h

60--------- indicates that the design point head is 60

9---------- indicates 9 pump levels

 

Scope of performance:

Pump suction and discharge caliber 40-350mm.

Flow rate Q = 3.75 ~ 1360 m3 / h.

Lift H = 92 ~ 1433 m.

Motor power N=7.5 to 4000KW.

For the transport of oils and petroleum products with a temperature of -20 to 105 ° C and a viscosity of less than 120 centistokes free of solid particles.

Detailed Photos

Product Parameters

Single suction structure:

1	2	3	4	5
the main shaft	Front bearing body	packing ring	fill section	bar
6	7	8	9	10
the impeller	guide vane	middle	guide vane	sealing ring
11	12	13	14	15
out of the water period	the transition pipe	Throttling and pressure relief device	the impeller	anti-missile leaf
16	17	18	19	20
secondary inlet section	Throttling and pressure relief device	end cap	Packing gland	against hydrosphere
21	22	23	24
Rear bearing body	Port for measuring temperature	Bearing end cap	Vibration measurement port

Double suction structure:

1	2	3	4	5
shaft	bearing body	Water inlet cover	fill section	middle
6	7	8	9	10
guide vane	The water period	anti-missile leaf	Pump cover components	secondary inlet section
11	12	13	14	15
Rear throttle sleeve	end cap	Tighten the bolts	Throttle sleeve	Packing gland
16	17	18	19
Transition pipe parts	Double suction impeller	the impeller	the impeller

DY Model parameters :

model	number of stages	flow		head	speed	power		efficiency	NPSHR	impeller diameter		weight
D(DF, DY, MD)360-60(P)						axial power	motor power			mm
		m3/h	L/s	m	r/min	kw		%	m			kg
	4	300	83.3	256	1480	290.4	400	72	3.1	430		2664
		360	100	240		315.8		74.5	4
		440	122.2	210		354.3		71	5.3
	5	300	83.3	320		363	500	72	3.1			2872
		360	100	300		394.8		74.5	4
		440	122.2	262.5		442.9		71	5.3
	6	300	83.3	384		435.6	560	72	3.1			3080
		360	100	360		473.7		74.5	4
		440	122.2	315		531.5		71	5.3
	7	300	83.3	448		508.1	710	72	3.1			3285
		360	100	420		552.7		74.5	4
		440	122.2	367.5		620.1		71	5.3
	8	300	83.3	512		580.7	800	72	3.1			3493
		360	100	480		631.7		74.5	4
		440	122.2	420		708.7		71	5.3
	9	300	83.3	576		653.3	900	72	3.1			3701
		360	100	540		710.6		74.5	4
		440	122.2	472.5		797.9		71	5.3
	10	300	83.3	640		725.9	1000	72	3.1			3909
		360	100	600		789.6		74.5	4
		440	122.2	525		885.9		71	5.3
model	number of stages	flow		head	speed	power		efficiency	NPSHR	impeller diameter		weight
D(DF, DY, MD)280-65(P)						axial power	motor power			mm
		m3/h	L/s	m	r/min	kw		%	m			kg
	3	185	51.4	204	1480	153.4	250	67	2.8	430		2465
		280	77.8	195		200.9		76	3.7
		335	93.1	186		232.4		73	5
	4	185	51.4	272		204.5	355	67	2.8			2664
		280	77.8	260		267.9		76	3.7
		335	93.1	248		309.9		73	5
	5	185	51.4	340		255.6	450	67	2.8			2872
		280	77.8	325		334.9		76	3.7
		335	93.1	310		387.4		73	5
	6	185	51.4	408		306.8	500	67	2.8			3080
		280	77.8	390		401.9		76	3.7
		335	93.1	372		464.9		73	5
	7	185	51.4	476		357.9	630	67	2.8			3285
		280	77.8	455		468.9		76	3.7
		335	93.1	434		542.4		73	5
	8	185	51.4	544		409.1	710	67	2.8			3493
		280	77.8	520		535.8		76	3.7
		335	93.1	496		619.9		73	5
	9	185	51.4	612		460.2	800	67	2.8			3701
		280	77.8	585		602.8		76	3.7
		335	93.1	558		697.4		73	5
	10	185	51.4	680		511.3	900	67	2.8			3909
		280	77.8	650		669.8		76	3.7
		335	93.1	620		774.8		73	5
	11	185	51.4	748		562.5	900	67	2.8			4117
		280	77.8	715		717.4		76	3.7
		335	93.1	682		852.3		73	5
	12	185	51.4	816		613.6	1000	67	2.8			4325
		280	77.8	780		782.6		76	3.7
		335	93.1	744		929.8		73	5

Assembly Drawing

Company Profile

Hunan Jiahua Pumps is a manufacturer with many years of experience in mining, power generation, dredging, hydraulic, irrigation, slurry transportation, construction, seawater, oil and gas transportation, solar energy system and other industries. 

We can provide you with high efficiency and energy saving of multistage pump, boiler feed pump, slurry pump, oil pump, self-priming pump, chemical pump, mining pumps, submersible pumps, sewage pumps, sea water pumps, solar pumps, fire pumps, split case pumps, irrigation pumps and other products.

Our Products sales well to Europe, America, Southeast Asia, Oceania, Middle East and Africa more than 90 countries.

Our products are widely used in mining, mineral processing, metallurgy, iron and steel, boiler water supply, oil field, chemical industry, paper making, water conservancy facilities, sewage treatment, drainage and water supply.

We have strong technical force, advanced production testing equipment, scientific management methods, stable and reliable quality products, perfect after-sales service.

We are committed to providing the highest level of customer service, competitive prices, fast delivery and comprehensive, sophisticated products. Your satisfaction is our ultimate goal!
 

Certifications

Working House

Our Services
1. Processing with supplied drawing
2. Processing with supplied samples
3. Produce all kinds of anti abrasive spare parts except for pump
4. Product warranty:lifetime, no matter how long to use,if there is air hole in the flow parts,please return it,will give you a new one to replace.

Application

Packaging & Shipping

FAQ

1. Q: Whats the MOQ ?
A: 1 set for regular product ,the special one we need to discuss.
 
2. Q : What're your payments ? 
A: For small order valve < 4000USD, our customer chose 100% T/T.
For order valve >4000USD, we can accept 30 % T/T in advance , 70 % should be paid before shipment.
 
3 . Q : How long is the deliver time ?
A : For the order in stock ,we will deliver goods at once against payment.
For the orders out of stock , the products time is 7 days for bare pump, 25 days for electric pump set or diesel engine pump set , the deliver time is base on the shipping date and your order by sea.
 
4. Q: What about the package ?
A : Standard export plywood case .
 
5.Q : How is the pump delivered to us ?
A : For urgently order, we can ship by air, for large order ,it will be delivered by sea ,vehicle or multi-modal transport.

 
6. Q : How long is the warranty ?
A: According to the inter nation standards , pump in standard operation is 1 year ,3 months for spare parts.
 
Any further questions, let's talk together.