Packing Seal Multistage Horizontal Cast Iron Explosion-Proof Centrifugal Oil Pump Is Used in Petrochemical Plants

• After-sales Service: 24 Hours Online Service
• Warranty: 12-24 Months
• Max.Head: >150m
• Max.Capacity: 50-100 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Model NO.: DF, DY, MD280-43(P)x8
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Circulating Pump
• Flow Rate: 3.75 ~ 1360 M3 / H
• Lift: 92 ~ 1433 M
• Motor Power: 7.5 to 4000kw
• Degree: -20~105 Degrees
• Material: Cast Iron/Carbon Steel/Stainless Steel/Ggg40
• Transport Package: Plywooden Case
• Trademark: jiahua
• Origin: China
• HS Code: 8413709990
• Production Capacity: 100

Product Description

Product Description

DY series self-balancing horizontal multistage centrifugal pump, divided into single suction multistage structure and double suction multistage structure. Can transport does not contain particles (abrasive), does not contain suspended water or chemical properties similar to water for other liquids. It is also possible to change the material of the pump (or the material of the pump flow parts), seal the form and increase the cooling system for conveying hot water, oil, corrosive and abrasive media, etc.

Pump inlet pressure is not more than 0.6mpa.
 

Model significance:

Such as DY450-60 x9 (P)

DY------ Represents horizontal multistage centrifugal oil pump

450------- indicates that the design point flow is 450m3/h

60--------- indicates that the design point head is 60

9---------- indicates 9 pump levels

 

Scope of performance:

Pump suction and discharge caliber 40-350mm.

Flow rate Q = 3.75 ~ 1360 m3 / h.

Lift H = 92 ~ 1433 m.

Motor power N=7.5 to 4000KW.

For the transport of oils and petroleum products with a temperature of -20 to 105 ° C and a viscosity of less than 120 centistokes free of solid particles.

Detailed Photos

Product Parameters

Single suction structure:

1	2	3	4	5
the main shaft	Front bearing body	packing ring	fill section	bar
6	7	8	9	10
the impeller	guide vane	middle	guide vane	sealing ring
11	12	13	14	15
out of the water period	the transition pipe	Throttling and pressure relief device	the impeller	anti-missile leaf
16	17	18	19	20
secondary inlet section	Throttling and pressure relief device	end cap	Packing gland	against hydrosphere
21	22	23	24
Rear bearing body	Port for measuring temperature	Bearing end cap	Vibration measurement port

Double suction structure:

1	2	3	4	5
shaft	bearing body	Water inlet cover	fill section	middle
6	7	8	9	10
guide vane	The water period	anti-missile leaf	Pump cover components	secondary inlet section
11	12	13	14	15
Rear throttle sleeve	end cap	Tighten the bolts	Throttle sleeve	Packing gland
16	17	18	19
Transition pipe parts	Double suction impeller	the impeller	the impeller

DY Model parameters :

model	number of stages	flow		head	speed	power		efficiency	NPSHR	impeller diameter		weight
D(DF, DY, MD)200-50(P)						axial power	motor power			mm
		m3/h	L/s	m	r/min	kw		%	m			kg
	4	132	36.7	218	2950	100.3	185	76	4.1	225		1275
		200	55.6	208		136.2		80	4.9
		240	66.7	198		158.8		79	5.8
	5	132	36.7	272		125.3	250	76	4.1			1365
		200	55.6	260		170.2		80	4.9
		240	66.7	248		198.6		79	5.8
	6	132	36.7	326		150.4	250	76	4.1			1455
		200	55.6	312		204.2		80	4.9
		240	66.7	298		238.3		79	5.8
	7	132	36.7	381		175.5	315	76	4.1			1545
		200	55.6	364		238.3		80	4.9
		240	66.7	347		278.0		79	5.8
	8	132	36.7	435		200.6	355	76	4.1			1635
		200	55.6	416		272.3		80	4.9
		240	66.7	397		317.7		79	5.8
	9	132	36.7	490		225.6	400	76	4.1			1725
		200	55.6	468		306.4		80	4.9
		240	66.7	446		357.4		79	5.8
	10	132	36.7	544		250.7	450	76	4.1			1815
		200	55.6	520		340.4		80	4.9
		240	66.7	496		397.1		79	5.8
model	number of stages	flow		head	speed	power		efficiency	NPSHR	impeller diameter		weight
D(DF, DY, MD)280-43(P)						axial power	motor power			mm
		m3/h	L/s	m	r/min	kw		%	m			kg
	3	185	51.4	141	1480	102.2	160	69.5	3	360		1290
		280	77.8	129		125.3		78.5	4.7
		335	93.1	114		135.2		77	6
	4	185	51.4	188		136.2	200	69.5	3			1385
		280	77.8	172		167.0		78.5	4.7
		335	93.1	152		180.2		77	6
	5	185	51.4	235		170.9	250	69.5	3			1480
		280	77.8	215		208.8		78.5	4.7
		335	93.1	190		225.3		77	6
	6	185	51.4	282		205.1	315	69.5	3			1575
		280	77.8	258		250.5		78.5	4.7
		335	93.1	228		270.3		77	6
	7	185	51.4	329		239.2	355	69.5	3			1670
		280	77.8	301		292.3		78.5	4.7
		335	93.1	266		315.4		77	6
	8	185	51.4	376		273.4	450	69.5	3			1765
		280	77.8	344		334.0		78.5	4.7
		335	93.1	304		360.4		77	6
	9	185	51.4	423		307.6	450	69.5	3			1860
		280	77.8	387		375.8		78.5	4.7
		335	93.1	342		405.5		77	6
	10	185	51.4	470		341.8	500	69.5	3			1960
		280	77.8	430		417.5		78.5	4.7
		335	93.1	380		450.5		77	6
	11	185	51.4	517		675.9	630	69.5	3			2055
		280	77.8	473		459.3		78.5	4.7
		335	93.1	418		495.6		77	6
	12	185	51.4	564		410.2	630	69.5	3			2150
		280	77.8	516		501.0		78.5	4.7
		335	93.1	458		540.6		77	6
model	number of stages	flow		head	speed	power		efficiency	NPSHR	impeller diameter		weight
D(DF, DY, MD)580-60(P)						axial power	motor power			mm
		m3/h	L/s	m	r/min	kw		%	m			kg
	3	450	125	195	1480	299	450	80	3.16	455		3659
		580	161.1	180		344		82.5	4.84
		638	177.2	165		355		81	5.16
	4	450	125	260		398	560	80	3.16			4015
		580	161.1	240		459		82.5	4.84
		638	177.2	220		473		81	5.16
	5	450	125	325		498	710	80	3.16			4371
		580	161.1	300		574		82.5	4.84
		638	177.2	275		591		81	5.16
	6	450	125	390		597	800	80	3.16			4727
		580	161.1	360		689		82.5	4.84
		638	177.2	330		709		81	5.16
	7	450	125	455		697	900	80	3.16			5083
		580	161.1	420		803		82.5	4.84
		638	177.2	385		828		81	5.16
	8	450	125	520		796	1120	80	3.16			5440
		580	161.1	480		918		82.5	4.84
		638	177.2	440		946		81	5.16
	9	450	125	585		896	1250	80	3.16			5795
		580	161.1	540		1033		82.5	4.84
		638	177.2	495		1064		81	5.16
	10	450	125	650		995	1250	80	3.16			6151
		580	161.1	600		1147		82.5	4.84
		638	177.2	550		1183		81	5.16

Assembly Drawing

Company Profile

Hunan Jiahua Pumps is a manufacturer with many years of experience in mining, power generation, dredging, hydraulic, irrigation, slurry transportation, construction, seawater, oil and gas transportation, solar energy system and other industries. 

We can provide you with high efficiency and energy saving of multistage pump, boiler feed pump, slurry pump, oil pump, self-priming pump, chemical pump, mining pumps, submersible pumps, sewage pumps, sea water pumps, solar pumps, fire pumps, split case pumps, irrigation pumps and other products.

Our Products sales well to Europe, America, Southeast Asia, Oceania, Middle East and Africa more than 90 countries.

Our products are widely used in mining, mineral processing, metallurgy, iron and steel, boiler water supply, oil field, chemical industry, paper making, water conservancy facilities, sewage treatment, drainage and water supply.

We have strong technical force, advanced production testing equipment, scientific management methods, stable and reliable quality products, perfect after-sales service.

We are committed to providing the highest level of customer service, competitive prices, fast delivery and comprehensive, sophisticated products. Your satisfaction is our ultimate goal!
 

Certifications

Working House

Our Services
1. Processing with supplied drawing
2. Processing with supplied samples
3. Produce all kinds of anti abrasive spare parts except for pump
4. Product warranty:lifetime, no matter how long to use,if there is air hole in the flow parts,please return it,will give you a new one to replace.

Application

Packaging & Shipping

FAQ

1. Q: Whats the MOQ ?
A: 1 set for regular product ,the special one we need to discuss.
 
2. Q : What're your payments ? 
A: For small order valve < 4000USD, our customer chose 100% T/T.
For order valve >4000USD, we can accept 30 % T/T in advance , 70 % should be paid before shipment.
 
3 . Q : How long is the deliver time ?
A : For the order in stock ,we will deliver goods at once against payment.
For the orders out of stock , the products time is 7 days for bare pump, 25 days for electric pump set or diesel engine pump set , the deliver time is base on the shipping date and your order by sea.
 
4. Q: What about the package ?
A : Standard export plywood case .
 
5.Q : How is the pump delivered to us ?
A : For urgently order, we can ship by air, for large order ,it will be delivered by sea ,vehicle or multi-modal transport.

 
6. Q : How long is the warranty ?
A: According to the inter nation standards , pump in standard operation is 1 year ,3 months for spare parts.
 
Any further questions, let's talk together.