Isg/Irg Cast Iron Pipeline Pump Vertical Centrifugal Pipeline Pump Circulation Pipeline Pump

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: 12-24 Months
• Model NO.: IRG125-200A
• Max.Head: 110m-150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps
• Frequency: 50Hz, 60Hz
• DN: 15~500mm
• Power Range: 0.18~160kw
• Pump Head: Cast Iron, Stainless Steel
• Flow Range: 1.1-1450 M3/H
• Lift Range: 7-150 M
• Transport Package: Plywooden Case
• Trademark: jiahua
• Origin: China
• HS Code: 8413709990
• Production Capacity: 200

Product Description

Product Description

ISG Products Introduction:
 ISG Series Vertical Centrifugal Pump for conveying water and other liquids with physical properties similar to water. Medium temperature below 80 ºC. Suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long distance water delivery, heating, bathroom heating and cooling supercharger and equipment support.

IRG Products Introduction:
1.Suction pressure less than 1.0MPA, Or the maximum working pressure of the system less than 1.6Mp,Pump suction inlet pressure + pump head less than 1.6Mpa,The static pressure of the pump was 2.5MP.
Please indicate the working pressure of the system when ordering,When the pressure of pump system is greater than 1.6 MPA, it should be stated in advance when ordering.
The cast steel material should used for the flow parts and connections of the manufacturing pump.
2. Environmental temperature less than 40C.  Relative humidity less than 95%.
3. Piping Pump volume of solid particles in the medium is not exceeding 0.1 percent of the unit volume, particle size less than 0.2mm. If have solid particles, Please indicate on the order, In order to use wear-resistant
mechanical seal.

Product Parameters

ISG structure chart:
ISG model number:

model	flow		Head	Motor power	Speed	Voltage	Efficiency	Cavitation excess
	m3 / h	L / S	m	KW	r / min	V	%	NPSHr
15-80	1.2	0.42	8	0.18	2800	220	34	2.5
20-110	2.5	0.69	15	0.37	200	220	34	2.5
20-160	2.5	0.69	32	0.75	2900	220/380	25	2.5
25-110	4	1.11	15	0.55	2900	220/380	42	2.5
25-125	4	1.11	20	0.75	2900	220/380	36	2.5
25-160	4	1.11	32	1.5	2900	380	32	2.5
25-160A	3.5	0.97	28	1.1	2900	220/380	31	2.5
32-100	4.5	1.25	12.8	0.55	2900	220/380	44	2
32-125	5	1.39	20	0.75	2900	220/380	38	2.5
32-125A	4.5	1.25	16	0.75	2900	220/380	37	2.5
32-160	4.5	1.25	32	1.5	2900	380	35	2
32-160A	4	1.1	25	1.1	2900	380	34	2
32-200	4.5	1.25	50	3	2900	380	32	2
32-200A	4	1.1	40	2.2	2900	380	31	2
40-100	6.3	1.75	12.5	0.55	2900	220/380	54	2.5
40-100A	5.5	1.53	10	0.37	2900	220/380	52.6	2.5
40-125	32-160A32-160A32-160A326.3	1.75	20	1.1	2900	220/380	46	2.5
40-125A	5.5	1.53	16	0.57	2900	220/380	44	2.5
40-160	6.3	1.75	32	2.2	2900	380	40	2.5
40-160A	5.5	1.53	28	1.5	2900	380	38	2.5
40-200	6.3	1.75	50	4	2900	380	33	2.5
40-200A	5.5	1.53	44	3	2900	380	31	2.5
40-250	6.3	1.75	80	7.5	2900	380	27.5	2.5
40-250A	5.5	1.53	70	5.5	2900	380	26	2.5
40-100 (I)	12.5	3.47	12.5	1.1	2900	220/380	62	2.5
40-100 (I) A	11	3.05	10	0.75	2900	220/380	60	2.5
40-125 (I)	40-160A12.5	3.47	20	1.5	2900	380	58	2.5
40-125 (I) A	11	3.05	16	1.1	2900	380	56	2.5
40-160 (I)	12.5	3.47	32	3	2900	380	52	2.5
40-160 (I) A.	11	305	28	2.2	2900	380	48	2.5
40-200 (I)	12.5	3.47	50	5.5	2900	380	46	2.5
40-200 (I) A	11	3.05	44	4	2900	380	43	2.5
40-250 (I)	12.5	3.47	80	11	2900	380	36	2.5
40-250 (I) A.	11	3.05	70	7.5	2900	380	34	2.5
50-100	12.5	3.47	12.5	1.1	2900	220/380	62	2.5
50-100A	11	3.05	10	0.75	2900	220/380	57	2.5
50-125	12.5	3.47	20	1.5	2900	380	58	2.5
50-125A	11	3.05	16	1.1	2900	220/380	53	2.5
50-160	12.5	3.47	32	3	2900	380	52	2.5
50-160A	11	3.05	28	2.2	2900	380	48	2.5
50-200	12.5	3.47	50	5.5	2900	380	46	2.5
50-200A	11	3.05	44	4	2900	380	43	2.5
50-250	12.5	3.47	80	11	2900	380	36	2.5
50-250A	11	3.05	70	7.5	2900	380	34	2.5
50-100 (I)	25	6.94	12.5	1.5	2900	380	69	3
50-100 (I) A	22	6.11	10	1.1	2900	380	68	3
50-125 (I)	25	6.94	20	2.2	2900	380	67	3
50-125 (I) A	22	6.11	16	2.2	2900	380	63	3
50-160 (I)	25	6.94	32	4	2900	380	63	3
50-160 (I) A	22	6.11	28	3	2900	380	59	3
50-160 (I) B	20	5.56	24	2.2	2900	380	61	3
50-200 (I)	25	6.94	50	7.5	2900	280	57	3
50-200 (I) A	22	6.11	44.2	5.5	2900	380	55	3
50-250 (I)	25	6.94	80	15	2900	380	50	3
50-250 (I) A	22	6.11	70	11	2900	380	47	3
50-315 (I)	25	6.94	125	30	2900	380	38	3
50-315 (I) A.	22	6.11	113	22	2900	380	38	3
65-100	25	6.94	12.5	1.5	2900	390	69	2
65-100A	20	5.6	8	1.1	2900	380	70	2
65-125	25	6.9	20	2.2	2900	380	69	2
65-125A	20	5.6	16	1.5	2900	380	65	2
65-160	25	6.9	32	4	2900	380	65	2
65-165A	22	6.11	28	3	2900	380	59	3
65-200	25	6.94	50	7.5	2900	380	57	3
65-200A	22	6.11	44.2	5.5	2900	380	55	3
65-250	25	6.94	80	15	2900	380	50	3
65-250A	22	6.11	70	11	2900	380	47	3
65-315	25	6.94	125	30	2900	380	40	3
65-315A	22	6.11	113	22	2900	380	38	3
65-100 (I)	50	13.9	12.5	3	2900	380	73	3.5
65-100 (I) A	44	12.2	10	2.2	2900	380	72	3.5
65-125 (I)	50	13.9	20	5.5	2900	380	72.5	3.5
65-125 (I) A.	44	12.2	16	4	2900	380	72	3.5
65-160 (I)	50	13.9	32	7.5	2900	380	71	3.5
65-160 (I) A.	44	12.2	28	7.5	2900	380	70	3.5
65-160 (I) B	40	11.1	24	5.5	2900	380	69	3.5
65-200 (I)	50	13.9	50	15	2900	380	67	3.5
65-200 (I) A	44	12.2	44	11	2900	380	66	3.5
65-200 (I) B	40	11.1	38	7.5	2900	380	65	3.5
65-250 (I)	50	13.9	80	22	2900	380	60	3.5
65-250 (I) A.	44	12.2	70	18.5	2900	380	57	3.5
80-100	50	13.9	12.5	3	2900	380	73	3.5
80-100A	44	12.2	10	2.2	2900	380	72	3.5
80-125	50	13.9	20	5.5	2900	380	72.5	3.5
80-125A	44	12.2	16	4	2900	380	72	3.5
80-160	50	13.9	32	7.5	2900	380	71	3.5
80-160A	44	12.2	28	7.5	2900	380	70	3.5
80-160B	40	11.1	24	5.5	2900	380	69	3.5
80-200	50	13.9	50	15	2900	380	67	3.5
80-200A	44	12.2	44	11	2900	380	66	3.5
80-200B	40	11.1	38	7.5	2900	380	65	3.5
80-250	50	13.9	80	22	2900	380	60	3
80-250A	44	12.2	70	18.5	2900	380	57	3
80-250B	40	11.1	60	155	2900	380	61	3
80-315	50	13.9	125	37	2900	380	54	3.09
80-315A	44	12.2	113	30	2900	380	53	3
80-315B	40	11.1	101	30	2900	380	52	3
80-350	50	13.9	150	55	2900	380	52	3
80-350A	44	12.2	142	45	2900	380	50.5	3

IRG structure chart:

1	2	3	4
impeller	pump body	mechanical seal	Against hydrosphere
5	6	7	8
end cap	impeller nut	pump spindle	electrical machinery

 IRG model number:

Company Profile

Hunan Jiahua Pumps is a manufacturer with many years of experience in mining, power generation, dredging, hydraulic, irrigation, slurry transportation, construction, seawater, oil and gas transportation, solar energy system and other industries. 

We can provide you with high efficiency and energy saving of multistage pump, boiler feed pump, slurry pump, oil pump, self-priming pump, chemical pump, mining pumps, submersible pumps, sewage pumps, sea water pumps, solar pumps, fire pumps, split case pumps, irrigation pumps and other products.

Our Products sales well to Europe, America, Southeast Asia, Oceania, Middle East and Africa more than 90 countries.

Our products are widely used in mining, mineral processing, metallurgy, iron and steel, boiler water supply, oil field, chemical industry, paper making, water conservancy facilities, sewage treatment, drainage and water supply.

We have strong technical force, advanced production testing equipment, scientific management methods, stable and reliable quality products, perfect after-sales service.

We are committed to providing the highest level of customer service, competitive prices, fast delivery and comprehensive, sophisticated products. Your satisfaction is our ultimate goal!
 

Working House

Certificate

Our Services
1. Processing with supplied drawing
2. Processing with supplied samples
3. Produce all kinds of anti abrasive spare parts except for pump
4. Product warranty:lifetime, no matter how long to use,if there is air hole in the flow parts,please return it,will give you a new one to replace.

Application

Packaging & Shipping

 

FAQ

1. Q: Whats the MOQ ?
A: 1 set for regular product ,the special one we need to discuss.
 
2. Q : What're your payments ? 
A: For small order valve < 4000USD, our customer chose 100% T/T.
For order valve >4000USD, we can accept 30 % T/T in advance , 70 % should be paid before shipment.
 
3 . Q : How long is the deliver time ?
A : For the order in stock ,we will deliver goods at once against payment.
For the orders out of stock , the products time is 7 days for bare pump, 25 days for electric pump set or diesel engine pump set , the deliver time is base on the shipping date and your order by sea.
 
4. Q: What about the package ?
A : Standard export plywood case .
 
5.Q : How is the pump delivered to us ?
A : For urgently order, we can ship by air, for large order ,it will be delivered by sea ,vehicle or multi-modal transport.

 
6. Q : How long is the warranty ?
A: According to the inter nation standards , pump in standard operation is 1 year ,3 months for spare parts.
 
Any further questions, let's talk together.