| After-sales Service: | 24 Hours Online |
|---|---|
| Warranty: | 12-24 Months |
| Max.Head: | 344m |
| Max.Capacity: | 280m3/H |
| Driving Type: | Electric Motor |
| Impeller Number: | 8stages |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier D-type horizontal multistage centrifugal pump is a single-suction multistage segmental centrifugal pump with advanced and reasonable structure, high pump efficiency, good cavitation resistance, low vibration, stable and reliable operation, and long life. . The product has reasonable performance, energy saving, practicality, high cost performance, flow rate Q: 21~720m3/h, head: 28.8~1000m Temperature range ≤80ºC This series of pumps are used to transport clean water below 80ºC or whose physical and chemical properties are similar to water For other liquids, it is an ideal mine drainage equipment, and it is also suitable for petroleum, chemical, metallurgical, factories, urban water supply and drainage, etc.
| 1 | 2 | 3 | 4 | 5 |
| Coupling pump | pump spindle | bearing | casing ring | Guide vane set |
| 6 | 7 | 8 | 9 | 10 |
| impeller | mesomere | guide vane | balancing sleeve | suction casing |
| 11 | 12 | 13 | 14 | |
| Spit out section | balance plate | balance piston | draw-in bolt |
Specification
| model | flow | head | motor power | speed | NPSHr | model | flow | head | motor power | speed | NPSHr |
| m3/h | m | kw | r/min | m3/h | m | kw | r/min | ||||
| DG15-80 | 1.1 | 8.5 | 0.18 | 2950 | 2.3 | 40-160(I) | 8.8 | 33 | 3 | 2950 | 2.3 |
| 1.5 | 8 | 12.5 | 32 | ||||||||
| 2 | 7 | 16.3 | 30 | ||||||||
| DG20-110 | 1.8 | 16 | 0.37 | 40-160(I)A | 8.2 | 29 | 2.2 | ||||
| 2.5 | 15 | 11.7 | 28 | ||||||||
| 3.3 | 13.5 | 15.2 | 26 | ||||||||
| DG20-160 | 1.8 | 33 | 0.75 | 40-160(I)B | 7.3 | 23 | 1.5 | ||||
| 2.5 | 32 | 10.4 | 22 | ||||||||
| 3.3 | 30 | 13.5 | 20.5 | ||||||||
| DG25-110 | 2.8 | 16 | 0.55 | ||||||||
| 4 | 15 | 40-200(I) | 8.8 | 51.2 | 5.5 | ||||||
| 5.2 | 13.5 | 12.5 | 50 | ||||||||
| DG25-125 | 2.8 | 20.6 | 0.75 | 16.3 | 48 | ||||||
| 4 | 20 | 40-200(I)A | 8.3 | 45 | 4 | ||||||
| 5.2 | 18 | 11.7 | 44 | ||||||||
| DG25-125A | 2.5 | 17 | 0.75 | 15.3 | 42 | ||||||
| 3.6 | 16 | 40-200(I)B | 7.5 | 37 | 3 | ||||||
| 4.6 | 14.4 | 10.6 | 36 | ||||||||
| DG25-160 | 2.8 | 33 | 1.5 | 13.8 | 34 | ||||||
| 4 | 32 | 40-250(I) | 8.8 | 81.2 | 11 | ||||||
| 5.2 | 30 | 12.5 | 80 | ||||||||
| DG25-160A | 2.6 | 29 | 1.1 | 16.3 | 77.5 | ||||||
| 3.7 | 28 | 40-250(I)A | 8.2 | 71 | 7.5 | ||||||
| 4.9 | 26 | 11.6 | 70 | ||||||||
| DG32-100 | 4.5 | 12.5 | 0.55 | 2 | 15.2 | 68 | |||||
| DG32-100(I) | 4.4 | 13.2 | 0.75 | 40-250(I)B | 7.6 | 61.4 | 5.5 | ||||
| 6.6 | 12.5 | 10.8 | 60 | ||||||||
| 8.3 | 11.3 | 14 | 58 | ||||||||
| DG32-125 | 3.5 | 22 | 0.75 | 2.3 | 40-250(I)C | 7.1 | 53.2 | 4 | |||
| 5 | 20 | 10 | 52 | ||||||||
| 6.5 | 18 | 13.1 | 50.4 | ||||||||
| DG32-125A | 3.1 | 17.6 | 0.55 | 50-100 | 8.8 | 13.6 | 1.1 | ||||
| 4.5 | 16 | 12.5 | 12.5 | ||||||||
| 5.8 | 14.4 | 16.3 | 11.3 | ||||||||
| DG32-160 | 3.2 | 33 | 1.5 | 50-100A | 8 | 11 | 0.75 | ||||
| 4 | 32 | 11 | 10 | ||||||||
| 5.2 | 30 | 14.5 | 9 | ||||||||
| DG32-160A | 2.6 | 29 | 1.1 | 2 | 50-125 | 8.8 | 21.5 | 1.5 | |||
| 3.7 | 28 | 12.5 | 20 | ||||||||
| 4.9 | 26 | 16.3 | 17.8 | ||||||||
| DG32-160(I) | 4.4 | 33.2 | 2.2 | 50-125A | 8 | 17 | 1.1 | ||||
| 6.3 | 32 | 11 | 16 | ||||||||
| 8.3 | 30.2 | 14.5 | 14 | ||||||||
| DG32-200 | 4.5 | 50 | 3 | 50-160 | 8.8 | 33 | 3 | ||||
| DG32-200(I) | 4.4 | 50.5 | 4 | 12.5 | 32 | ||||||
| 6.3 | 50 | 16.3 | 30 | ||||||||
| 8.3 | 48 | 50-160A | 8.2 | 29 | 2.2 | ||||||
| DG32-200A | 2.8 | 44.6 | 4 | 11.7 | 28 | ||||||
| 4 | 44 | 15.2 | 26 | ||||||||
| 5.2 | 42.7 | 50-160B | 7.3 | 23 | 1.5 | ||||||
| DG40-100 | 4.4 | 13.2 | 0.75 | 2.3 | 10.4 | 22 | |||||
| 6.3 | 12.5 | 13.5 | 20.5 | ||||||||
| 8.3 | 11.3 | 50-200 | 8.8 | 52 | 5.5 | ||||||
| DG40-100A | 3.9 | 10.6 | 0.75 | 12.5 | 50 | ||||||
| 5.6 | 10 | 16.3 | 48 | ||||||||
| 7.4 | 9 | 50-200A | 8.3 | 45.8 | 4 | ||||||
| DG40-125 | 4.4 | 21 | 1.1 | 11.7 | 44 | ||||||
| 6.3 | 20 | 15.3 | 42 | ||||||||
| 8.3 | 18 | 50-200B | 7.5 | 37 | 3 | ||||||
| DG40-125A | 3.9 | 17.6 | 0.75 | 10.6 | 36 | ||||||
| 5.6 | 16 | 1.8 | 34 | ||||||||
| 7.4 | 14.4 | 50-250 | 8.8 | 82 | 11 | ||||||
| DG40-160 | 4.4 | 33 | 2.2 | 12.5 | 80 | ||||||
| 6.3 | 32 | 16.3 | 77.5 | ||||||||
| 8.3 | 30 | 50-250A | 8.2 | 71.5 | 11 | ||||||
| DG40-160A | 4.1 | 29 | 1.5 | 11.6 | 70 | ||||||
| 5.9 | 28 | 16.3 | 68 | ||||||||
| 7.8 | 26.3 | 50-250B | 7.6 | 61.4 | 7.5 | ||||||
| DG40-160B | 3.8 | 25.5 | 1.1 | 10.8 | 60 | ||||||
| 5.5 | 24 | 14 | 58 | ||||||||
| 7.2 | 22.5 | 50-250C | 7.1 | 53.2 | 5.5 | ||||||
| DG40-200 | 4.4 | 51 | 4 | 10 | 52 | ||||||
| 6.3 | 50 | 13.1 | 50.4 | ||||||||
| 8.3 | 48 | 50-100(I) | 17.5 | 13.7 | 1.5 | 2.5 | |||||
| DG40-200A | 4.1 | 45 | 3 | 25 | 12.5 | ||||||
| 5.9 | 44 | 32.5 | 10.5 | ||||||||
| 7.8 | 42 | 50-100(I)A | 15.6 | 11 | 1.1 | ||||||
| DG40-200B | 3.7 | 38 | 2.2 | 22.3 | 10 | ||||||
| 5.3 | 36 | 29 | 8.4 | ||||||||
| 7 | 34.5 | 50-125(I) | 17.5 | 21.5 | 3 | ||||||
| DG40-250 | 4.4 | 82 | 7.5 | 25 | 20 | ||||||
| 6.3 | 80 | 32.5 | 18 | ||||||||
| 8.3 | 74 | 50-125(I)A | 15.6 | 17 | 2.2 | ||||||
| DG40-250A | 4.1 | 72 | 5.5 | 22.3 | 16 | ||||||
| 5.9 | 70 | 29 | 13.6 | ||||||||
| 7.8 | 65 | 50-160(I) | 17.5 | 34.4 | 4 | ||||||
| DG40-250B | 3.8 | 61.5 | 5.5 | 25 | 32 | ||||||
| 5.5 | 60 | 32.5 | 27.5 | ||||||||
| 7.0 | 56 | 50-160(I)A | 16.4 | 34.4 | 4 | ||||||
| DG40-100(I) | 8.8 | 13.2 | 1.1 | 23.4 | 32 | ||||||
| 12.5 | 12.5 | 30.4 | 27.5 | ||||||||
| 16.3 | 11.3 | 50-160(I)B | 15 | 26 | 3 | ||||||
| DG40-100(I)A | 8 | 10.6 | 0.75 | 21.6 | 24 | ||||||
| 11 | 10 | 28 | 20.6 | ||||||||
| 14.5 | 9 | 50-200(I) | 17.5 | 52.7 | 7.5 | ||||||
| DG40-125(I) | 8.8 | 21.2 | 1.5 | 25 | 50 | ||||||
| 12.5 | 20 | 32.5 | 45.5 | ||||||||
| 16.3 | 17.8 | 50-200(I)A | 16.4 | 46.4 | 7.5 | ||||||
| DG40-125(I)A | 8 | 17 | 1.1 | 23.4 | 44 | ||||||
| 11 | 16 | 30.4 | 40 | ||||||||
| 14.5 | 14 | 50-200(I)B | 15.2 | 40 | 5.5 | ||||||
| DG50-250(I) | 17.5 | 82 | 15 | 2.5 | 21.8 | 38 | |||||
| 25 | 80 | 28.3 | 34.5 | ||||||||
| 32.5 | 76.5 |
Hunan Jiahua Pumps is a manufacturer with many years of experience in mining, power generation, dredging, hydraulic, irrigation, slurry transportation, construction, seawater, oil and gas transportation, solar energy system and other industries.
We can provide you with high efficiency and energy saving of multistage pump, boiler feed pump, slurry pump, oil pump, self-priming pump, chemical pump, mining pumps, submersible pumps, sewage pumps, sea water pumps, solar pumps, fire pumps, split case pumps, irrigation pumps and other products.
Our Products sales well to Europe, America, Southeast Asia, Oceania, Middle East and Africa more than 90 countries.
Our products are widely used in mining, mineral processing, metallurgy, iron and steel, boiler water supply, oil field, chemical industry, paper making, water conservancy facilities, sewage treatment, drainage and water supply.
We have strong technical force, advanced production testing equipment, scientific management methods, stable and reliable quality products, perfect after-sales service.
We are committed to providing the highest level of customer service, competitive prices, fast delivery and comprehensive, sophisticated products. Your satisfaction is our ultimate goal!
Our Services
1. Processing with supplied drawing
2. Processing with supplied samples
3. Produce all kinds of anti abrasive spare parts except for pump
4. Product warranty:lifetime, no matter how long to use,if there is air hole in the flow parts,please return it,will give you a new one to replace.
Application
1. Q: Whats the MOQ ?
A: 1 set for regular product ,the special one we need to discuss.
2. Q : What're your payments ?
A: For small order valve < 4000USD, our customer chose 100% T/T.
For order valve >4000USD, we can accept 30 % T/T in advance , 70 % should be paid before shipment.
3 . Q : How long is the deliver time ?
A : For the order in stock ,we will deliver goods at once against payment.
For the orders out of stock , the products time is 7 days for bare pump, 25 days for electric pump set or diesel engine pump set , the deliver time is base on the shipping date and your order by sea.
4. Q: What about the package ?
A : Standard export plywood case .
5.Q : How is the pump delivered to us ?
A : For urgently order, we can ship by air, for large order ,it will be delivered by sea ,vehicle or multi-modal transport.
6. Q : How long is the warranty ?
A: According to the inter nation standards , pump in standard operation is 1 year ,3 months for spare parts.
Any further questions, let's talk together.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}